ASP.NET, SQL Server, WPF, C#, VB.NET

CENTRAL ÚNICA DE VENDAS 
 
10 Marcas de ratreadores, Compare e Compre. 
 
Rastreador de Veículo 
 
Rastreadores de Veículos 
 
Rastreador GPS 
 
Rastreadores GPS 
 
Rastreador Ituran 
 
Rastreadores Ituran 
 
Rastreador Portátil 
 
Rastreadores Portáteis. 
 
Assistência 24 Horas 
 
Visite agora mesmo nosso site. 
 
http://tel011-50523122.vila.bol.com.br/ 
 
Graber - Teletrim - Tele Trim - Ituran - 
 
Rastreadores gps , Localizadores, Bloqueadores 
 
Graber - Teletrim - Tele Trim - Ituran - 
 
Ra ...

We have configured a new Server with Windows 2000 SBS to replace the old 
 
Server. 
 
All the settings including administrator, usernames, computer name, 
 
passwords are identical. 
 
How would you suggest we move the Exchange Mailboxes from the old Server to 
 
the new Server. 
 
Can we do this after the old Server has been taken off the network. 
 
Your help is appreciated. 
 
Regards, 
 
Guido

If you have an idea to start your own Small Business, you should know 
 
which the five crucial needs for small businesses are: 
 
1. Idea - You want to start business, but not have idea about what 
 
that business should be. The key is that idea must be generated from 
 
somewhere; otherwise it is impossible to start a business. 
 
2. Knowledge and Experience - Many people attempt to enter a field in 
 
which they have a limited experience. Before you enter in the business 
 
spend time in the  ...

I recently did a post on buySAFE and how they bond sellers on eBay. 
 
Today (on the buySAFE blog), they announced 3,000,000 listings are 
 
being protected by their service. 
 
If the seller has the buySAFE seal - the transaction is guaranteed. 
 
http://fraudwar.blogspot.com/2006/08/buysafe-protecting-3000000-ebay.html

was wondering if you can help me with a problem I am trying to solve. 
 
This problem is regarding Symantec Antivirus Corporate Edition 10.0. 
 
I've install and configure all the setting such as scans, update and 
 
other user settings. I have also installed the client firewall but I am 
 
having problem 
 
Configuring the firewall policy. When I unlock the server group and I 
 
right click on it and go to all task there is an consol that says 
 
Symantec Client Firewall 
 
When I move my mouse ...

I am attempting to upgrade from SBS 2000 to SBS 2003. I have gone through the 
 
"best practices" documents and tried to make the changes they suggest 
 
including installing SBS SP-1 etc. When I attempt to run setup it does the 
 
checks, gives me  the 4 standard warnings (backup your data, no connection 
 
sharing, upgrade licenses, and DS restore password). I accept the warnings 
 
and continue. Setup begins but less than a minute into setup I get an error 
 
message "Setup was interrupted be ...

If you use VPN and have remote workers who install Windows Live OneCare in 
 
its default configuration, they will no longer be able to access your 
 
network using VPN.  OneCare blocks GRE by default, so when attempting a 
 
connection, users receive Error 721 - The remote computer did not respond. 
 
The fix is to open OneCare and click View or Change Settings.  On the 
 
Firewall tab, click Advanced, then go to the Ports and Protocols tab.  Check 
 
the box to enable "VPN - General Routing En ...

Hello. 
 
Win SBS2000 with all latest updates and service packs, one NIC, DSL Modem, 
 
Zyxel Zywall 10, Netgear FS116 switch, Static IP. 
 
We are constantly getting a System Log Event ID 8003, Source: MRxSmb.  I 
 
tried working it out using EventID.org, but none of the suggestions helped 
 
in resolving this problem.  Here is the text: 
 
"The master browser has received a server announcement from the computer 
 
TIMMY that believes it is the master browser for the domain on transport 
 
NetB ...

Hi, 
 
Can someone please confirm something for me.  When running a SBS2003 
 
network, do all users logging on to the clients need to be local 
 
administrators in order for the SBS_Login_script.bat and the 
 
<server>\clients\setup\setup.exe /s <Server> call to work.  I have one new 
 
user that whenever they log on, they get a "You must be a member of the local 
 
administrators security group on this computer to install and configure 
 
applications.  Contact your network administrator ...

Hi there to every 1, 
 
I have a problem regarding adsl conflicting with my Lan 
 
I am using windows advance server 2000 with 2 network cards on it. 
 
One for Adsl which has static ips provided by my isp which is like this 
 
Ip Add: 192.168.1.2 
 
Subnet: 225.225.225.0 
 
Default gateway: 192.168.1.1 
 
Pref Dns: 210.56.14.146 
 
Alt Dns : 210.56.8.8 
 
----------------------------------- 
 
Second one is my LAN adopter 
 
IP Add: 192.168.0.1 
 
Subnet: 225.225.225.0 
 
Default gateway: empty ...

Hi - all go here at the moment... :O( 
 
I have rescued the databases (well, in fact the entire \Exchange directory ) 
 
from a customers failed SBS 2000 server. 
 
I want to rescue their old mail and ultimately transfer it to their new 
 
SBS2003 
 
Having some time yesterday, I quickly installed SBS2000 on some spare kit, 
 
in the hope that I can pull in the old Exchange data and somehow extract the 
 
email for the 3 users. The plan would be to get as far as 3x .pst files, 
 
that I could th ...

Please help.  Our office has SBS 2000 with a Dell PowerEdge 2600. 
 
Uploading from workstation to server is pretty fast (56Mbps), but 
 
downloading from the server is extremely slow (2.4Mbps).  These numbers 
 
are fairly consistent during business hours and after business hours. 
 
I have added 2GB of memory and a 15,000 RPM hard drive to the server 
 
recently and neither has helped.  Workstation to workstation is 
 
consistently 72Mbps, so I am fairly certain that it is not a switch 
 
issu ...

Please help.  Our office has SBS 2000 with a Dell PowerEdge 2600. 
 
Uploading from workstation to server is pretty fast (56Mbps), but 
 
downloading from the server is extremely slow (2.4Mbps).  These numbers 
 
are fairly consistent during business hours and after business hours. 
 
I have added 2GB of memory and a 15,000 RPM hard drive to the server 
 
recently and neither has helped.  Workstation to workstation is 
 
consistently 72Mbps, so I am fairly certain that it is not a switch 
 
issu ...

Hello, 
 
Can anyone point me to official microsoft documentation defining support (or 
 
not) for WSUS on SBS 2000? 
 
Thanks, 
 
-- 
 
Rich

Sorry to bother you guys again. 
 
I have quite a bizarre problem with a dell poweredge 2500 server, running 
 
windows 2000. The initial problem was that the system rebooted after the "NT 
 
Authority System" initiated a shutdown (status code 128, the thing where it 
 
counts down fron 60 seconds and cant be stopped) after this when attempting 
 
to boot we got the Blue "STOP" 
 
This series of events happened when a Dell powervault tape drive was 
 
replaced with a newer model. My colleague th ...

Hi, 
 
Im quite new to SBS but looking from the questions on here most of you 
 
on here arent using the pop3 connector for your email. How do you have your 
 
email set up? I cuurently utilise a 3rd party who host our mail and web 
 
pages. Can I use SBS to do that for me? 
 
Thanks, 
 
DavieBoy

http://www.smbnation.com/Default.aspx?TabId=149

Hi, 
 
Does anyone know how you can configure exchange to be able to handle 
 
more than one domain name? E.g I have a user that has a pop3 account they 
 
need to be able to utilise but it is different from the domain name already 
 
being utilised in Exchange. 
 
Currently for both mail domains they are Pop3 so exchange is just picking 
 
the mails up from s specified mail server and that is going to be the case 
 
with this other domain. 
 
Any help would be great! 
 
Cheers, 
 
DavieBoy

Am using OWA, RWW etc. externally at the moment, but without a 3rd party SSL 
 
cert (during setup  I just entered the external IP address of the server, so 
 
we access using http://221.2.3.4/exchange etc. (we get asked to ok a cert in 
 
the browser each time and it switches to https, incidentally) 
 
Now going to get the GeoTrust dedicated digital certificate as it seems 
 
cheap - however it seems to talk about entering domain names etc. 
 
There is a website for the company, but it is hoste ...

http://www.microsoft.com/athome/security/update/bulletins/200608.mspx 
 
-- 
 
Kevin Weilbacher [SBS-MVP] 
 
"The days pass by so quickly now, the nights are seldom long"

Hi, we have three people in our company ( let's say ABC) who are 
 
starting a subsidiary company (let's say XYZ) but want to remain on our 
 
SBS 2000 network infrastructure.  Basically I need to limit their 
 
access to specific folders on the server and make sure they can use 
 
Outlook to send / receive email but only have access to XYZ employees 
 
Outlook mail / calanders and not our company, ABC, Outlook information. 
 
Was wondering if anyone had some best practices in implementing this 
 
kind of scenerio? Thanks.

I know this is probably an easy question but I have not come across 
 
this before. 
 
We have a block of 5 static IP's.  One IP is used for our WAN 
 
connection on SBS another IP is used for our security camera system. 
 
What I would like to do is use a third public IP for a second building 
 
we're occupying and I would like to be able to access SBS through the 
 
third IP as if it we're on the LAN and not a public IP. 
 
How do I configure ISA to treat the third IP as part of the LAN? 
 
Any help would be greatly appreciated. 
 
Kevin G

I am looking at taking over a client from another IT company. 
 
One of the main issues is problems with backups. 
 
Here is a copy of the latest log. 
 
I've got no real idea what's causing all these errors. 
 
it appears if exchange is not being backed up. 
 
I know there's lots of errors here but any insight would help me a lot. 
 
Backup Status 
 
Operation: Backup 
 
Active backup destination: 8mm AIT1 
 
Media name: "Media created 4/08/2006 at 11:30 PM" 
 
Backup of "C: System" 
 
Backup s ...

Hi all, running sbs2000 on Dell poweredge 2500 with perc3di configured for 
 
raid 5 4 hard drives in containers 0-3. tried to reboot and got the message 
 
"unexpected hard error", then when system tried to restart, the file 
 
"ntoskrnl.exe" was missing or corrupt, i also noticed indicator on drive in 
 
container "0" (zero) was showing drive failure. 
 
I tried to do a repair on windows 2000 using the original disc, but it said 
 
no hard drives are present,so could not continue (i think this ...